The short answer
For a backyard greenhouse, 8 mm twin-wall polycarbonate is the default in our plans: it carries about 34 in between purlins at 20 psf of snow in Palram's table, insulates a little better than 6 mm and lets through the same light. Our 8x12 takes 11 x 12 ft sheets 4 ft wide, $1,885.73 of glazing. Corrugated panels cost about the same per sheet area and much less in profiles, and Palram suggests them for heavy snow.
Polycarbonate is what most backyard greenhouses are glazed with now: light, hard to break, and sold in sheets that a frame on 2 ft centers is built around. The choice is between twin-wall sheets, two skins joined by ribs, in 6, 8 or 10 mm, and single-wall corrugated panels. This guide puts the maker’s own tables side by side, counts the panels each of our plans takes, and prices the glazing at the stores we read.
Our plans draw 8 mm twin-wall by default and let you switch to 6 mm, 10 mm or corrugated in the greenhouse designer. Every figure below comes from that designer and from Palram’s1 and Plaskolite’s5 own documents.
- 1Palram Palram, SUNLITE Plus Installation Instructions for Greenhouses, 2021
- 2Palram Palram, SUNLITE Technical Guide, form 61353, 07.2019 (copy on specifiedby.com)
- 3Palram Americas Palram Americas, SUNLITE, Form 1211 032626, 2026
- 4Palram Americas Palram Americas, SUNTUF Installation Guide, Form 409, rev. 2010-04-15 (Home Depot copy)
- 5Plaskolite Plaskolite, Polygal Multiwall guide, (c) 2024
Twin-wall or corrugated
Twin-wall sheets trap a layer of air between two skins, so they insulate better than a single skin and spread the light. If you are glazing with salvaged glass instead, the old window greenhouse guide covers the checks and the roof. Palram’s1 twin-wall greenhouse sheets come 6, 8 and 10 mm thick and, in the US, 48 or 72 in wide; the retail Sunlite sold in home centers is 8 mm, 48 in wide, in 8, 10 and 12 ft lengths. The open ends of the flutes have to be taped and capped.
Corrugated panels are a single wavy skin. Palram’s1 Suntuf comes 26 in wide in 8, 10 and 12 ft lengths, or 49.6 in wide, and is screwed through the crown of every other rib on a roof and in the valley of every other rib on a wall, as Palram’s installation guide gives for vertical panels. Palram calls it excellent greenhouse cladding, and its twin-wall guide says single-wall corrugated may be the better roof where snow is heavy. It needs no H or U profiles, only foam closures and a ridge, which is why it costs less to fit.
| Panel | Light, clear | Insulation, US R-value | Purlins at 20 psf of snow |
|---|---|---|---|
| 6 mm twin-wall | 80% | about R-1.6 | 26 in |
| 8 mm twin-wall | 80% | about R-1.7 | 34 in |
| 10 mm twin-wall | 79% | about R-1.9 to 2.0 | 42 in |
| Corrugated (Suntuf) | not compared here | single skin | 36 in at 20 psf, 16 in at 50 psf |
Light and insulation for twin-wall are from Palram’s1 technical guide and Plaskolite’s5 multiwall guide; the R-values are our conversion of their U-values. The purlin spacings are Palram’s mid-span figures; Palram asks for about 20% less at the eave and ridge spans, which is how the designer sizes them.
- 1Palram Palram, SUNLITE Plus Installation Instructions for Greenhouses, 2021
- 2Palram Palram, SUNLITE Technical Guide, form 61353, 07.2019 (copy on specifiedby.com)
- 3Palram Americas Palram Americas, SUNLITE, Form 1211 032626, 2026
- 4Palram Americas Palram Americas, SUNTUF Installation Guide, Form 409, rev. 2010-04-15 (Home Depot copy)
- 5Plaskolite Plaskolite, Polygal Multiwall guide, (c) 2024
What thickness to choose
Thickness is a structural choice before it is a heat one. Palram’s1 table lets 8 mm twin-wall span 46 in between purlins at 10 psf, 34 in at 20 psf and 26 in at 25 psf; 6 mm drops to 36, 26 and 20 in, and 10 mm reaches 50, 42 and 36 in. Our plans set the purlins for the snow load you enter, so a thinner sheet means more purlins and a thicker one fewer.
The heat difference is small. Going from 6 to 10 mm takes the R-value from about 1.6 to 2.0, and Plaskolite’s5 U-value from 0.63 to 0.53, about a sixth less heat lost through the glazing, at much the same light. That matters in a heated winter greenhouse and hardly at all in a season extender. Palram1 does not recommend 4 mm twin-wall for structural use, so we do not draw it.
Bending is the other limit. Palram’s1 cold-bend radius is 41 in for 6 mm, 55 in for 8 mm and 69 in for 10 mm, and the US retail Sunlite sheet allows a curve of no less than 20 ft. Our gable and lean-to plans keep every sheet flat.
- 1Palram Palram, SUNLITE Plus Installation Instructions for Greenhouses, 2021
- 2Palram Palram, SUNLITE Technical Guide, form 61353, 07.2019 (copy on specifiedby.com)
- 3Palram Americas Palram Americas, SUNLITE, Form 1211 032626, 2026
- 4Palram Americas Palram Americas, SUNTUF Installation Guide, Form 409, rev. 2010-04-15 (Home Depot copy)
- 5Plaskolite Plaskolite, Polygal Multiwall guide, (c) 2024
How many panels each plan takes
The designer lays the sheets on a 4 ft grid so every edge lands on a stud or rafter, then counts the lengths to buy. These are the sheets for the plans as drawn, with the walls, the end gables and the roof:
| Plan | Twin-wall sheets, 4 ft wide | Corrugated, 26 in wide |
|---|---|---|
| 6x8 greenhouse | 1 x 12 ft, 4 x 10 ft, 4 x 8 ft | 4 x 12 ft, 10 x 10 ft, 5 x 8 ft |
| 8x12 greenhouse | 11 x 12 ft | 19 x 12 ft, 5 x 10 ft, 2 x 8 ft |
| 10x12 greenhouse | 11 x 12 ft, 2 x 8 ft | 23 x 12 ft, 5 x 8 ft |
| 12x20 greenhouse | 11 x 12 ft, 7 x 10 ft | 25 x 12 ft, 13 x 10 ft |
Corrugated panels are about half as wide, so the count roughly doubles. Every plan’s materials list also gives the cut for each sheet.
What the glazing costs
The glazing is the biggest line on a greenhouse after the lumber. Here is the 8x12 plan in each panel, priced line by line at the stores we read, before shipping and tax:
| 8x12 greenhouse in | Sheets | Profiles and sealing | Whole materials list |
|---|---|---|---|
| 6 mm twin-wall | $1,190.64 | $733.47 | $3,963.85 |
| 8 mm twin-wall | $1,885.73 | $674.11 | $4,560.03 |
| 10 mm twin-wall | $1,661.44 | $873.87 | $4,535.50 |
| Corrugated | $1,232.76 | $193.86 | $3,349.79 |
One 4 x 12 ft sheet of 8 mm twin-wall read at $171.43 at Steve Regan Company (steveregan.com), 6 mm at $108.24 and 10 mm at $151.04; a 26 in x 12 ft Suntuf1 corrugated panel read at $50.90 at Home Depot, Hamilton Mill store. Twin-wall then needs its H and U profiles, the solid and vented tapes and a glazing bar on the roof, which is where corrugated saves most. Price your own size and panel in the greenhouse cost calculator.
- 1Palram Palram, SUNLITE Plus Installation Instructions for Greenhouses, 2021
- 2Palram Palram, SUNLITE Technical Guide, form 61353, 07.2019 (copy on specifiedby.com)
- 3Palram Americas Palram Americas, SUNLITE, Form 1211 032626, 2026
- 4Palram Americas Palram Americas, SUNTUF Installation Guide, Form 409, rev. 2010-04-15 (Home Depot copy)
Fitting the panels
The maker’s rules our plans follow, in the order you meet them:
- Slope. Palram’s US instructions ask for at least 2 in of rise per 12 in for twin-wall roofs and forbid flat ones; Suntuf needs at least 1-1/2 in per 12 in.
- Flutes down the slope. The ribs of twin-wall run with the slope on the roof and upright on the walls, so water inside them drains out.
- UV side out. Only one face of a standard twin-wall sheet is UV protected, and it must face the sun.
- Seal the ends. Solid tape on the top edge, vented tape on the bottom edge, then a U profile over both, with 1/4 in weep holes every 8 in in the bottom one.
- Leave room to move. Palram gives about 3 mm of expansion per meter over a 90 F swing and recommends allowing double that, so leave the sheets room in the profiles and drill the screw holes oversized.
- Screws. Pre-drill 3/16 in, use screws with EPDM washers every 12 in along each support, 8 in in high wind, and stop before the washer deforms. Suntuf is screwed on the crown of every other rib on the roof, and in the valley of every other rib on the walls.
The how to build a greenhouse guide shows where the glazing goes in the build, and every plan lists the profiles, tapes and screws for its own sheets.
- 1Palram Palram, SUNLITE Plus Installation Instructions for Greenhouses, 2021
- 2Palram Palram, SUNLITE Technical Guide, form 61353, 07.2019 (copy on specifiedby.com)
- 3Palram Americas Palram Americas, SUNLITE, Form 1211 032626, 2026
- 4Palram Americas Palram Americas, SUNTUF Installation Guide, Form 409, rev. 2010-04-15 (Home Depot copy)
Sources
Every number in this guide that does not come from our own greenhouse designer was checked against these 5 documents, numbered in the order the text first cites them and read between Oct 8, 2026 and Oct 13, 2026. 5 are extension services, codes and makers.
- 1PalramPalram, SUNLITE Plus Installation Instructions for Greenhouses, 2021
- 2PalramPalram, SUNLITE Technical Guide, form 61353, 07.2019 (copy on specifiedby.com)
- 3Palram AmericasPalram Americas, SUNLITE, Form 1211 032626, 2026
- 4Palram AmericasPalram Americas, SUNTUF Installation Guide, Form 409, rev. 2010-04-15 (Home Depot copy)
- 5PlaskolitePlaskolite, Polygal Multiwall guide, (c) 2024




